The HIPHOTONICS 100G CFP2 Optical Transceiver is a high-performance optical module designed for 100 Gigabit Ethernet, data center, telecom, and optical transport network applications. Based on the compact CFP2 form factor, the module provides high-density 100G connectivity while supporting digital diagnostics and flexible network deployment.
The 100G CFP2 family can include SR10, LR4, and ER4 configurations, supporting different fiber types and transmission distances. For example, the 100GBASE-LR4 CFP2 configuration supports up to 10 km over single-mode fiber using four LAN-WDM wavelengths around 1310 nm.
0755 - 27662758
sales@hiphotonics.com
The 100G CFP2 LR4 is one of the primary configurations in the HIPHOTONICS 100G CFP2 product family.
It uses four optical wavelengths around 1310 nm, typically:
The four optical channels are multiplexed onto a single fiber pair, enabling high-capacity 100G transmission over G.652 single-mode fiber up to 10 km.
The optical interface uses a duplex LC connector, making the module compatible with conventional LC fiber infrastructure.
The CFP2 form factor was developed to provide high-density optical connectivity for 40G/100G network equipment. The module integrates the optical transmitter and receiver into a compact pluggable package, allowing network operators to deploy 100G interfaces without using larger fixed optical assemblies.
Typical applications include:
Depending on the selected configuration, HIPHOTONICS 100G CFP2 modules can support both 100G Ethernet and OTU4 applications.
Typical CFP2 LR4 products support aggregate line rates in the approximately 103.125–111.81 Gbps range and can be designed for both 100GBASE-LR4 and OTU4 operation.
This makes the CFP2 platform suitable for both high-speed data communication and optical transport applications.
The module incorporates a digital diagnostic interface, allowing network equipment to monitor operating parameters such as:
This provides network operators with additional information for equipment management, troubleshooting, and preventive maintenance. CFP2 LR4 implementations commonly use an MDIO management interface for digital diagnostics.
HIPHOTONICS can provide different CFP2 configurations according to network requirements:
| Model | Fiber | Wavelength | Typical Reach | Connector |
|---|---|---|---|---|
| 100G CFP2 SR10 | MMF | 850nm | 100–150m | MPO |
| 100G CFP2 LR4 | SMF | 1310nm LAN-WDM | Up to 10km | Duplex LC |
| 100G CFP2 ER4 | SMF | 1310nm LAN-WDM | Up to 30–40km* | Duplex LC |
*Transmission distance depends on the specific module design, optical budget, fiber quality, and network configuration. CFP2 product families are available in SR10, LR4 and ER4 configurations with different reach options.
| Parameter | Specification |
|---|---|
| Product Type | 100G CFP2 Optical Transceiver |
| Form Factor | CFP2 |
| Application | 100GBASE-LR4 / OTU4 |
| Data Rate | 100Gbps |
| Aggregate Line Rate | Up to approximately 112Gbps |
| Fiber Type | Single-mode Fiber |
| Fiber Grade | G.652 SMF |
| Wavelength | 4 × LAN-WDM, around 1310nm |
| Typical Wavelengths | 1295.56 / 1300.05 / 1304.58 / 1309.14nm |
| Transmission Distance | Up to 10km |
| Optical Connector | Duplex LC |
| Electrical Interface | 4 × 28G class |
| DDM / DOM | Supported |
| Power Supply | +3.3V |
| Power Consumption | Model-dependent, typically <6–12W |
| Operating Temperature | 0°C to +70°C standard |
| Hot Pluggable | Yes |
| Standards | CFP2 MSA / IEEE 802.3ba / ITU-T G.959.1 |
| RoHS | Available |
| OEM Compatibility | Available |
Representative CFP2 LR4 specifications from current industry datasheets include duplex LC, 10 km SMF reach, +3.3 V supply, DDM, and 0–70°C operating temperature; exact power consumption and optical parameters vary by implementation.
100G Switch / Router
↓
HIPHOTONICS 100G CFP2 LR4
↓
Duplex LC Single-Mode Fiber
↓
10 km Optical Link
↓
100G CFP2 LR4
↓
100G Switch / Router
This configuration provides a practical solution for connecting network equipment across data centers, telecom facilities, and metropolitan network infrastructure.
HIPHOTONICS 100G CFP2 transceivers can be supplied with vendor-specific compatibility programming for suitable network equipment.
Depending on the project, compatibility can be configured for equipment from major network manufacturers, subject to technical verification and sample testing.
OEM options include:
HIPHOTONICS provides optical transceivers and fiber optic connectivity products for data centers, telecommunications networks, enterprise infrastructure, and high-speed optical communication systems.
The 100G CFP2 Optical Transceiver provides a compact, high-bandwidth solution for network operators and system integrators requiring reliable 100G connectivity.
For specific applications, HIPHOTONICS can provide 100G CFP2 SR10, LR4, ER4 and other compatible configurations, together with technical datasheets, compatibility information, samples, and volume quotations.
Contact HIPHOTONICS for 100G CFP2 technical specifications, compatibility verification, samples, and OEM requirements.
Wechat / WhatsApp: 86 130 7568 1698
Téléphone: 86 0755-27662758
Courriel : sales@hiphotonics.com
Ajouter:Bâtiment D6, parc industriel de Chuangzhao, rue Kengzi, district de Pingshan, Shenzhen, Chine
English
French
Spanish
Arabic
