Fast Connector SC/UPC SC/APC 01-Shenzhen Hiphotonics Optical Communication Co., Ltd.

Products Fast Connector SC Fast Connector

Fast Connector SC/UPC SC/APC 01

The Hiphotonics Fast Connector HH A01 55 is a high-performance pre-embedded fiber optic connector that is easy to put together in the field. It works with both single-mode and multi-mode fibers, as well as drop cables and indoor cables like 3.0×2.0mm, Ø3.0mm, and Ø0.9mm.

0755-27662758

sales@hiphotonics.com

Send Inquiry
Download

Some important qualities are:<br/>Installation is quick and easy (approximately 50 seconds without cutting fiber)<br/>Low insertion loss (usually ≤0.3 dB) and high return loss (UPC ≥50 dB, APC ≥55 dB)<br/>Strong tensile and mechanical durability (≥45N pull strength; >10 reuse cycles)<br/>Works well in a wide range of temperatures (-40°C to +85°C) and passes strict mechanical and environmental tests (impact, vibration, torsion, humidity, salt mist, etc.).<br/>Small size (55 mm long in total)<br/>You can buy them in blister boxes or gift boxes, and they can be shipped in bulk (up to 2,000 pieces per box).<br/>The HH A01 55 is great for FTTH/FTTX deployments since it has a lot of production capacity and quality control. It makes fast, solid optical connections without any tools.

Some important qualities are:
Installation is quick and easy (approximately 50 seconds without cutting fiber)
Low insertion loss (usually ≤0.3 dB) and high return loss (UPC ≥50 dB, APC ≥55 dB)
Strong tensile and mechanical durability (≥45N pull strength; >10 reuse cycles)
Works well in a wide range of temperatures (-40°C to +85°C) and passes strict mechanical and environmental tests (impact, vibration, torsion, humidity, salt mist, etc.).
Small size (55 mm long in total)
You can buy them in blister boxes or gift boxes, and they can be shipped in bulk (up to 2,000 pieces per box).
The HH A01 55 is great for FTTH/FTTX deployments since it has a lot of production capacity and quality control. It makes fast, solid optical connections without any tools.

Category			Specification
Aoolicable for		Drop cable. Indoor cable
Fiber mod		Single mode or Multi mode
Fiber type			G.652D, G.657A2,

Fiber cable	3.0*2.0mm rubber-insulated optical cable ∅3.0
Fiber cable		/∅0.9 insulated optical cab
Fiber diameter			0.125mm

Force holds 2 x 3mm cable type at the		≥ 45 N, loss ≤ 0.3 dB
beginning the fast connector		≥ 45 N, loss ≤ 0.3 dB
beginning the fast connector
Fiber lock	Lock holds fiber reliability, bears hang force ≥ 1.5
Fiber lock	N, attenuation changes ≤ 0.2 dB
	N, attenuation changes ≤ 0.2 dB
Working wavelength		1310 nm, 1490 nm, 1550 nm


Operation time	S		About 50(no fiber cut)
Insertion Loss	dB		≤0.35
Insertion Loss Typical value	dB		0.3
Return Loss	dB		UPC≥50, APC≥55
Fastening strength of naked fiber	N		≥3
Tensile strength	N		≥45
Reusable	Time		≥10 time
Operating Temperature			-40~+85
On-line tensile strength（20N）	dB		ΔIL≤0.3

Mechanical durability (500 times)	dB		ΔIL≤0.3
Drop-off test (drop-off height4m, once per	dB		ΔIL≤0.3
direction, totally 3 times)	dB		ΔIL≤0.3
direction, totally 3 times)

Environmental performance requirements:

Category	Specification
	Condition	IL Variation	RL Variation	Appearance
High TEMP	85℃, 96H	≤0.3	≤5
Low TEMP	-40℃, 96H	≤0.3	≤5
Temperature	Cycle: 8 hours			No mechanical
Cycle	Total: 12 cycles / 96 hours	≤0.3	≤5	No mechanical
Cycle	Total: 12 cycles / 96 hours	≤0.3	≤5	da mage, like
	Temperature Maintenance: 1 hour			da mage, like
	Temperature Maintenance: 1 hour			deformation,
Temperature/	85℃, 95%RH, 96H	≤0.3	≤5	deformation,
Temperature/	85℃, 95%RH, 96H			cracking and
Humidity				cracking and
Humidity				untight
Immersion	25℃, 96H	≤0.3	≤5	untight
Immersion	25℃, 96H	≤0.3	≤5
Salt Mis	5% Nacl, 6.5＜PH＜ 7.5,35℃,96H	≤0.3	≤5

Mechanical Performance Requirement

Category		Specification
Category	Condition		IL Variation	RL Variation	Appearance
	Condition		IL Variation	RL Variation	Appearance
Impact	Height: 4m; 1 drop each axis; 3		≤0.3	≤5
Impact	cycles		≤0.3	≤5
	cycles
	Frequency: 10 ～ 50HZ;
Vibration	Sweep: 45 times / min;		≤0.3	≤5	No mechanical
	amplitude: 0.75mm;				da mage, like
	Duration:30min each axial				deformation,
	Pull： 15N; The distance between				cracking and
	Pull： 15N; The distance between				untight
	Loading location and fast				untight
Torsional	Loading location and fast		≤0.3	≤5
Torsional	connector: L = 22-28cm; Rate：		≤0.3	≤5
	connector: L = 22-28cm; Rate：
	10times / min. Times:
Tensile	Pull：50N; The distance between		≤0.3	≤5
Tensile	Loading lo cation and fast		≤0.3	≤5
	Loading lo cation and fast
	connector: L = 3M; Duration:1min

With Hiphotonics’s strong production capacity and quality control, the HH A01 55 is ideal for FTTH/FTTX deployments, offering rapid, tool-less, and stable optical connections.

Next：Fast Connector SC/UPC SC/APC 02

Send Inquiry

Recommended