0755-27662758
sales@hiphotonics.com
Key Features:
Structure: Multiple loose tubes filled with waterproof gel, housed in a UV-resistant LSZH or PE outer jacket.
Fiber Count: Up to 144 fibers depending on tube configuration.
Strength: Central strength member and optional aramid yarn for high tensile performance.
Environment: UV-resistant, water-blocking yarns, suitable for aerial, duct, or direct burial applications.
Flame Retardant: Meets IEC 60332-1, LSZH optional for indoor-outdoor transitions.
| Cable Specification | ||||||
| Fiber Cores | 12 | 24 | 36 | 48 | 96 | |
| No.of Tubes | 1 | 2 | 3 | 4 | 8 | |
| Fiber counts in Tube | 12 | 12 | 12 | 12 | 12 | |
| Tuber/Filler | 2.0±0.2 mm | |||||
| Central Strength Member | FRP | |||||
| Water resistance material | Water Blocking Yarns | |||||
| Outer jacket | material | Black HDPE | ||||
| Thickness | Nominal 1.6 mm | |||||
| Cable Diameter | 8.0±0.5 | 8.0±0.5 | 8.0±0.5 | 8.0±0.5 | 10.5±0.5 | |
| Tension | 1000 N | |||||
| Crushing (Long-term/Short-term) | 800/1500 N/100mm | |||||
| Min. Bending Radius(Dynamic/Static) | 25×/12.5× Cable OD | |||||
| Temperature(Installation/Operating) | -20～+60/-40～+70 ℃ | |||||
| Drum Size | m/Drum | 2000±10% | ||||
| Kg/Drum | 130±10% | 130±10% | 130±10% | 130±10% | 200±10% | |
| mm | 700×600 | 700×600 | 700×600 | 700×600 | 800×600 | |
| Parameters of fiber | ||||||
| Optical fiber type | Unit | G.652D | ||||
| Waveband | nm | 1310/1550 | ||||
| Attenuation | dB/km | ≤0.35/0.22 | ||||
| MFD (1550/1310) | μm | 9.2±0.5/10.4±0.4 | ||||
| Cladding diameter | μm | 125.0±1 | ||||
| Coating diameter | μm | 242±7 | ||||
Hiphotonics has over 21 years of fiber optic cable manufacturing experience, supported by:
A 5,000㎡ facility with automated SZ-stranding lines, sheathing lines, and precision fiber coloring equipment.
Monthly output capacity exceeding 400,000 meters of FTTH cables.
Strong R&D support to customize tube count, jacket color, and marking per project needs.
🧪 Testing & Quality Control
To ensure consistent quality, every cable is subjected to strict in-house testing including:
OTDR and attenuation testing
Tensile and crush resistance
Temperature cycling and water penetration tests
Flame retardance and UV aging tests
Hiphotonics is equipped with:
Agilent and Yokogawa OTDRs
Environmental test chambers
IEC standard flame test equipment
Precision geometry and fiber eccentricity analyzers
✅ Certifications
Hiphotonics’s FTTH optical cables are manufactured under a strict quality management system, holding certifications such as:
ISO 9001:2015 (Quality Management System)
IEC 60794 Compliant for optical cable mechanical and environmental tests
RoHS & REACH Compliance for environmental safety
CE Certification for conformity with EU directives
Third-party verification reports are available from SGS, TUV, or other qualified bodies upon request.
Wechat/WhatsApp: +86 130 7568 1698
Tel: +86 0755-27662758
E-mail: sales@hiphotonics.com
Add:D6 Building, Chuangzhao Industrial Park, Kengzi Street, Pingshan District,Shenzhen,China
